Opening And Closing The System; Opening The System - Dell PowerEdge T310 Hardware Owner's Manual

Opening and Closing the System

Opening the System

1 Unless you are removing a hot-swap component such as a hard drive or a
2 Lay the system on a flat surface.
3 Turn the lock on the cover release latch counterclockwise to the
4 Press the cover release latch, and rotate the latch end of the cover away
5 Grasp the cover on both sides and carefully lift the cover away
Downloaded from www.Manualslib.com
WARNING:
Whenever you need to lift the system, get others to assist you.
To avoid injury, do not attempt to lift the system by yourself.
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
power supply, turn off the system and attached peripherals. Disconnect
the system from the electrical outlet and peripherals.
unlocked position. See Figure 3-5.
from the system. See Figure 3-5.
from the system. See Figure 3-5.
manuals search engine
Installing System Components
85