Installing The Pcie Card Holder; Opening And Closing The Pcie Card Holder Latch - Dell Precision Rack 7910 Owner's Manual

Hide thumbs Also See for Precision Rack 7910:
Table of Contents

Advertisement

Installing the PCIe card holder

1.
Ensure that you read the
2.
Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Do not use your system without the PCIe card holder installed. The PCIe card holder is
necessary to ensure proper system cooling.
1.
Align the PCIe card holder with the notches and tabs on the power supply unit cage.
2.
Press the release tab and slide PCIe card holder toward the front of the chassis until firmly seated.
1.
If applicable, replace the full-length PCIe card.
2.
Follow the procedure listed in
To see a video on how to remove & install a PCI card and riser, scan this QR code, or click here:
www.Dell.com/QRL/Workstation/R7910/PCI

Opening and closing the PCIe card holder latch

1.
Ensure that you read the
2.
Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
To open the PCIe card holder latch, press the release tab.
2.
To close the PCIe card holder latch, rotate the latch clockwise until it locks.
NOTE: Before installing a full-length PCIe card, the PCIe card holder latch must be closed.
When the full-length PCIe card is installed, open the PCIe card holder latch. Before removing
the full-length PCIe card, you must close the PCIe card holder latch.
Safety
instructions.
Before working inside your
After working inside your
Safety
instructions.
Before working inside your
system.
system.
system.
http://
47

Advertisement

Table of Contents
loading

Table of Contents