Boot Settings Screen - Dell PowerEdge T310 Hardware Owner's Manual

Option
Port B
(Off default)
Port C
(Off default)
Port D
(Off default)
Port E
(Auto default)

Boot Settings Screen

Option
Boot Mode
(BIOS default)
Boot Sequence
Hard-Disk Drive Sequence The sequence of hard drives. Use the up and down arrow
USB Flash Drive
Emulation Type
Boot Sequence Retry
(Disabled default)
Downloaded from www.Manualslib.com
Description
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port C. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port D. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port E. Off disables BIOS support for the device.
Description
If the system operating system supports Unified
Extensible Firmware Interface, you can set this option
to UEFI. Setting this field to BIOS allows compatibility
with non-UEFI operating systems.
NOTE:
Sequence, Hard-Disk Drive Sequence, and USB Flash
Drive Emulation Type fields.
If Boot Mode is set to BIOS, this field provides the
location of the operating system files for startup. If Boot
Mode is set to UEFI, you can access the UEFI boot
manager utility by rebooting the system and pressing
<F11> when prompted to do so.
keys to choose the hard disk.
Determines the emulation type for a USB flash drive.
Auto automatically chooses the appropriate emulation
type for the device.
If this field is Enabled and the system fails to boot,
the system reattempts to boot after 30 seconds.
Using the System Setup Program and UEFI Boot Manager
manuals search engine
CAUTION:
Switching the boot mode could prevent
the system from booting if the operating system was
not installed in the same boot mode.
Setting this field to UEFI disables the Boot
63