Dell PowerEdge T310 Hardware Owner's Manual page 27

Table 1-2. LCD Status Messages (continued)
Code
E1116 Memory
E1210 Motherboard
E1211 RAID
E1216 3.3V
E1229 CPU # VCORE
Downloaded from www.Manualslib.com
Text Causes
Memory has exceeded
allowable temperature
disabled,
and has been disabled
temp above
to prevent damage to
range. Power
the components.
cycle AC.
CMOS battery is missing
or the voltage is outside
battery
of the allowable range.
failure.
Check
battery.
RAID battery is either
missing, bad, or unable
Controller
to recharge due to
battery
thermal issues.
failure.
Check
battery.
3.3V voltage regulator
has failed.
Regulator
failure.
Reseat PCIe
cards.
Specified processor
VCORE voltage regulator
Regulator
has failed.
failure.
Reseat CPU.
manuals search engine
Corrective Actions
Remove AC power to the
system for 10 seconds and
restart the system.
See "Troubleshooting
System Cooling Problems"
on page 154. If the problem
persists, see "Getting Help"
on page 177.
See "Troubleshooting the
System Battery" on
page 152.
Reseat the RAID battery
connector. See "RAID
Battery (Optional)" on
page 132 and
"Troubleshooting System
Cooling Problems" on
page 154.
Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting
Expansion Cards" on
page 162.
Reseat the processor.
See "Troubleshooting the
Processor" on page 163.
If the problem persists,
see "Getting Help" on
page 177.
About Your System
27