Dell PowerEdge T310 Hardware Owner's Manual page 29

Table 1-2. LCD Status Messages (continued)
Code
E1414 CPU # temp
E1418 CPU # not
E141C Unsupported
E141F CPU #
E1420 CPU Bus
Downloaded from www.Manualslib.com
Text Causes
Processor is out
of acceptable
exceeding
temperature range.
range. Check
CPU heatsink.
Processor is missing or bad,
and the system is in
detected.
an unsupported
Check CPU is
configuration.
seated
properly.
Processor is in an
unsupported
CPU configur-
configuration.
ation. Check
CPU or BIOS
revision.
The system BIOS has
reported a processor
protocol
protocol error.
error. Power
cycle AC.
The system BIOS has
reported a processor
parity error.
bus parity error.
Power cycle
AC.
manuals search engine
Corrective Actions
Ensure that the processor
heat sink is properly
installed. See
"Troubleshooting the
Processor" on page 163 and
"Troubleshooting System
Cooling Problems" on
page 154.
Ensure that the processor is
properly installed.
See "Troubleshooting the
Processor" on page 163.
Ensure that your processor
matches and conforms to
the type described in the
processor technical
specifications outlined in
your system's Getting
Started Guide.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 177.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 177.
About Your System
29