Decoding Illumination; Decode Aiming Pattern - Motorola Symbol DS3408 Product Reference Manual

5 - 4 Symbol DS3408 Product Reference Guide

Decoding Illumination

Parameter # F0h, 2Ah
Selecting Enable Decoding Illumination causes the digital scanner to flash illumination to aid decoding. Select
Disable Decoding Illumination to prevent the digital scanner from using decoding illumination.
Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the
distance to the target increases.
*Enable Decoding Illumination

Decode Aiming Pattern

Parameter # F0h, 32h
This parameter only applies when in Decode Mode. Select Enable Decode Aiming Pattern to project the aiming
pattern during bar code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off.
NOTE With picklist enabled, the decode aiming pattern flashes even when the Decode Aiming Pattern is
disabled.
*Enable Decode Aiming Pattern
(01h)
(02h)
Disable Decoding Illumination
(00h)
Disable Decode Aiming Pattern
(00h)