Connecting To An Ibm 468X/469X Host - Motorola Symbol DS3408 Product Reference Manual
Motorola symbol ds3408 barcode scanner product reference guide
Hide thumbs
Also See for Symbol DS3408:
- Quick start manual (2 pages) ,
- Product reference manual (428 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
9 - 2
Symbol DS3408 Product Reference Guide
Connecting to an IBM 468X/469X Host
Connect the digital scanner directly to the host interface.
Host Port Connector
IBM Direct Connection
Figure 9-1
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner are the
same.
Attach the modular connector of the IBM 46XX interface cable to the cable interface port on the digital scanner
1.
(see
Installing the Interface Cable on page
Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).
2.
Select the port address by scanning the appropriate bar code from
3.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
4.
NOTE The only required configuration is the port address. The IBM system typically controls other digital
scanner parameters.
Interface Cable
1-2).
Port Address on page
Figure 9-1
are examples
9-4.
Advertisement
Table of Contents
