Connecting An Rs-232 Interface - Motorola Symbol DS3408 Product Reference Manual
Motorola symbol ds3408 barcode scanner product reference guide
Hide thumbs
Also See for Symbol DS3408:
- Quick start manual (2 pages) ,
- Product reference manual (428 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
7 - 2
Symbol DS3408 Product Reference Guide
Connecting an RS-232 Interface
Connect the digital scanner directly to the host computer.
Serial Port
Connector to Host
RS-232 Direct Connection
Figure 7-1
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner are the
same.
Attach the modular connector of the RS-232 interface cable to the cable interface port on the digital scanner
1.
(see
Installing the Interface Cable on page
Connect the other end of the RS-232 interface cable to the serial port on the host.
2.
Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply
3.
into an appropriate outlet.
Select the RS-232 host type by scanning the appropriate bar code from
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
Power Supply Cable
1-2).
Interface Cable
Figure 7-1
page
7-6.
are examples
Advertisement
Table of Contents
