2 - 6
Symbol DS3408 Product Reference Guide
Center the symbol in any orientation within the aiming pattern. Be sure the entire symbol is within the
4.
rectangular area formed by the brackets in the pattern.
1D bar code symbol
Centering Symbol in Aiming Pattern
Figure 2-4
Hold the trigger until the digital scanner beeps, indicating the bar code is successfully decoded. For more
5.
information on beeper and LED definitions, see
This process usually occurs instantaneously. Steps 2 - 4 are repeated on poor quality or difficult bar codes, until the
bar code is decoded, the trigger is released, or the Decode Session Timeout occurs.
2D bar code symbol
Aiming Pattern
Table 2-1
and
Table
2-2.