Troubleshooting (Q&A)
Burst
Symptom
You want to specify a still picture to use
in a slide show during group display.
Still pictures are not displayed as part
of the same burst group.
You do not want to display still pictures
as part of the same burst group.
Set the still picture that you want to specify as a favorite in advance. However, note that if more
than one still picture is set as a favorite, the picture set as a favorite that is closest to the first
picture in the group is selected.
In the following cases, still pictures are not recognized as being in the same burst group.
●
When the still pictures cannot be displayed as a burst group on the LUMIX digital camera
●
Pictures that are recorded at different times
●
When a picture inside a group has been moved to a different folder
●
When the information specifying burst pictures has been deleted, such as when a still picture
is edited
If still pictures recorded in Burst Mode are copied or edited and then saved in the same folder
as the original still picture, they may be treated as a part of the same burst group.
If you do not want to display these still pictures as part of the same burst group, designate a
different folder than the folder containing the original still picture as the save destination.
Check
Others
171