Retouching pictures
Red-eye removal
Click
[Remove red-eye].
1
Drag the mouse pointer over the eye that the flash has
2
turned red in the displayed still picture, and select the
area to adjust.
Click [Apply].
3
Sharpness
1
Click
[Clear].
Drag the [Intensity of correction] slider to adjust the
2
contrast of the contours, and [Scope of correction] to
adjust the precision of contour recognition.
●
To return the sliders to their initial settings, click [Default].
Click [Apply].
3
Tips
●
The effect of red-eye removal may vary depending on the still picture.
●
By switching to the [Operation] tab, you can check the retouch history
and see preview pictures. If you want to return to a previous step in
the process, select that operation and click [Return to here].
Clicking [Operating Instructions] brings up the operating instructions
(this manual).
Mosaic
Click
[Mosaic].
1
Drag the mouse pointer across the displayed still picture
2
to select the area you want to replace with a mosaic.
Drag the [Mosaic size] slider to set the size of the squares
3
in the mosaic.
Click [Apply].
4
Composite
1
Click
[Composite].
Click [Open] and select the still picture you want to paste
2
in.
Drag the pasted still picture onto the displayed still
3
picture to adjust its position and size, and drag the
[Transparency] slider to adjust the transparency.
●
By holding down the [Shift] key while you drag the slider to adjust
the size, you can preserve the still picture's aspect ratio.
●
To delete the pasted picture, click [Cancel].
Click [Apply].
4
Editing still pictures
75