Panasonic DMC-FZ150 Lumix Basic Owner's Manual page 380

Deleting a part of a motion picture
A B
Slider
C
: Delete start point.
C
: Current playback position.
D
: Delete end point.
E
: Deletion range.
F
Tips
●
Because the editing is performed in 0.5-second units, the deletion
position may be slightly misaligned for AVCHD motion pictures (NTSC
specification) with a picture size of 1920×1080 that were recorded
with a digital camera (such as DMC-GH1) that was packaged with a
PHOTOfunSTUDIO version other than this one. Also, reverse/forward
playback by frame cannot be performed in the [Delete partially]
screen.
D
E
F
●
If you want to select multiple ranges, repeat steps
●
To cancel a selected range, select the corresponding thumbnail
and click [Release].
: Thumbnail that represents the range that will remain.
A
: Thumbnail that represents the range that will be deleted.
B
8
Click [Start preview] to check the edit
results.
●
You can cancel the playback by clicking [Stop Preview].
9
Click [Partially delete].
The motion picture after editing will be newly created and
saved in the same folder as the original motion picture.
●
An "E" for "Edited" appears inside the icon on the thumbnail for
the created motion picture.
●
A lot of time is required for processing. Do not operate the PC
until the operation is completed.
10
Click [Close].
Editing motion pictures
3 7
to .
134