Panasonic DMC-FZ150 Lumix Basic Owner's Manual page 104

[3D PLAYBACK]
•
This will work when the HDMI mini cable (optional) is connected.
•
Refer to P160 for the method to playback 3D pictures in 3D.
} [SCENE MENU]
[MENU RESUME]
[VERSION DISP.]
[FORMAT]
•
Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not
turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove
the card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the card cannot be formatted, please try another card before contacting your nearest Service
Center.
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
Setup the output method for 3D pictures.
[ ]: Set when connecting to a 3D compatible television.
[ ]: Set when connecting to a television not compatible
with 3D.
Set this when you would like to view pictures in 2D
(conventional image) on a 3D compatible television.
Set the screen that is displayed when the mode dial is set to [
[ ], [ ], [ ], [
[OFF]: The recording screen in the currently selected
Advanced Scene Mode or Scene Mode appears.
[AUTO]: The Advanced Scene Mode or Scene Mode menu
screen appears.
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
It is possible to check which version of firmware is on the camera.
The built-in memory or card is formatted. Formatting irretrievably
deletes all the data so check the data carefully before formatting.
- 60 -
Basic
] and [ ].
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
],