Troubleshooting; If Trouble Occurs - Kyocera TASKALFA FS-1100 Operation Manual

7

Troubleshooting

If Trouble Occurs

If trouble occurs with this machine, carry out the items indicated below. If the trouble persists,
contact your service representative.
Symptom Items to check
Nothing is displayed on the Is the power plug connected to an AC
operation panel when the outlet?
main power switch is
turned on.
No copies come out when Is there any indication of the trouble on
the Start key is pressed.
the operation panel?
The copies come out Were the originals set correctly?
blank.
The copies come out too Is the auto density adjustment mode
light. set?
Is the manual density mode set?
Is the toner evenly distributed in the
toner container?
Is the EcoPrint mode set?
Is Adding Toner requested?
Is the copy paper wet?
Is the electrical charge section dirty?
The copies come out too Is the auto density adjustment mode
dark. set?
Is the manual density mode set?
Corrective procedure
Connect the plug to an AC outlet.
Check the appropriate measures
against that indication and carry out the
corresponding procedure.
When setting originals on the platen,
set them face-down along the original
size indicator plates.
When setting originals in the optional
document processor, set them face-up.
To adjust the overall density level,
perform the auto density adjustment
procedure.
Use the Lighter key or the Darker key
to adjust the density level properly.
To adjust the overall density, perform
the relevant density adjustment
procedure in each image quality mode.
Shake the toner container horizontally
approximately 10 times.
Do not set the EcoPrint mode.
Replace the toner container.
Replace the copy paper with new paper.
Open the front cover and use the
charger cleaner rod to clean the
electrical charge section.
To adjust the overall density level,
perform the auto density adjustment
procedure.
Use the Lighter key or the Darker key
to adjust the density level properly.
To adjust the overall density, perform
the relevant density adjustment
procedure in each image quality mode.
Reference
page
3-1
7-4
3-1
2-11
-
3-2
-
6-5
-
6-5
2-1
6-7
-
3-2
-
7-1