Kyocera TASKALFA FS-1100 Operation Manual page 98

System Menu Items Description
49.Silent mode Shortens the amount of time the internal motor
continues to run after the copy is produced. Use this
setting in cases when the motor noise is bothersome.
50.Auto Clear Sets the copier so that automatic clearing is executed
after a set amount of time has elapsed after the copy is
produced. (Refer to Auto Clear function on page 1-6.)
51.Auto Sleep The Auto Sleep mode will be entered after a set period
of time has passed after the final copy has been
produced or during which no operations have been
performed.
If the Auto Sleep function interferes with your copy
operations, disable the function. Before disabling the
Auto Sleep function, you may want to try lengthening
the amount of time before the Auto Sleep function
engages (Sleep Mode Transition Time).
52.AutoClearTime Sets the time interval prior to the automatic operation
of the Auto Clear function when On (Enable) has been
selected as the 50.Auto Clear setting.
This will not be displayed when 50.Auto Clear is set to
Off.
53.LowPower Time Sets the time interval prior to the automatic
engagement of the Low Power mode after copy
operations have been completed.
54.AutoSleepTime Sets the time interval prior to the automatic operation
of the Auto Sleep function when On (Enable) has been
selected as the 51.Auto Sleep setting.
This will not be displayed when 51.Auto Sleep is set to
Off.
55.Alarm The Alarm can be set to sound when a key on the
Operation Panel is pressed or in cases when errors
occur, etc.
56.CoverageRepo Prints out a report that shows the number of copies
made and the average amount of toner used
(blackness ratio %) for each paper size.
Appendix
Available settings
0, 5, 10, 15, 30
(seconds) (*10)
On: Enabled*
Off: Disabled
On: Enabled*
Off: Disabled
10 to 270 (10-second
units) (*120)
1, 5, 15, 30, 45, 60,
90, 120, 180, 240
(minutes) (*1)
1, 5, 15, 30, 45, 60,
90, 120, 180, 240
(minutes) (*1)
On: Enabled (sound
alarm)
Off: Disabled (no
alarm)*
---
Appendix-9