Replacing The Toner Container And The Waste Toner Box - Kyocera TASKALFA FS-1100 Operation Manual

Replacing the Toner Container and the Waste Toner Box

When message Add toner is displayed on the message display the machine stops. Replace the
toner container together with the waste toner box.
Notes
Add toner only when Add Toner is displayed on the message display.
Whenever the toner container is changed, be sure to carry out the procedure described from step 7
on page 6-7 through step 11 on page 6-7. If any section is left dirty, the performance of this product
cannot be maintained.
Do not attempt to incinerate the toner container or the waste toner box. Dangerous
sparks may cause burns.
Do not attempt to force open or destroy the toner container or the waste toner box.
1 Open the front cover.
2
While pushing the waste toner box holder to the left,
remove the waste toner box.
Important!
Do not invert the old waste toner box.
High voltage is present in the charger section. Take sufficient care when working in this
area, as there is a danger of electrical shock.
Caution
Caution
Warning
Maintenance
6-5