Key Counter; Printer Kit / Printer Server; Additional Memory - Kyocera TASKALFA FS-1100 Operation Manual

Key Counter

The key counter is used to confirm the amount of
usage of the copier functions. It is useful in managing
copier usage for each department, section, etc. as well
as in the company overall.
Setting the Key Counter
Set the key counter securely in the key counter slot.
Note
In the case where the key counter is used, no one will be able to make copies until it is installed in
the machine. Insert key counter will be displayed when the key counter has not been securely
inserted.

Printer Kit / Printer Server

A printer kit can be installed to use the copier as a printer as well. Ask you local dealer for more
information. In some countries a printer server is available as well.

Additional Memory

A memory can be added for the copier functions and the printer functions respectively. Adding a
memory will increase the maximum number of originals that can be scanned at one time. Also
complicated data can be printed. An additional memory of 64 MB or 128 MB is effective for originals
containing photos with a low compression ratio.
Notes
• Available memory
For copier: 16 MB, 32 MB, 64 MB, 128 MB
• Number of originals that can be scanned (A4 originals with of 6 % coverage, Text + Photo
mode)
16 MB
289 sheets
32 MB 64 MB
392 sheets 597 sheets
Optional Equipment
128 MB
1006 sheets
5-3