Specifying Custom Paper Size; Selecting Special Paper Type - Kyocera TASKALFA FS-1100 Operation Manual

Specifying Custom Paper Size

1 Select the Customized Size. (Refer to Selecting a Size from Regular Sizes on page 2-7.), and
press the OK key.
2 Press
297(mm): The range in which setting is possible, and press the
OK key.
3
Press
to 432(mm): The range in which setting is possible, and press
the OK key.
4
Proceed to Step 4 of Selecting a Size from Regular Sizes on page 2-7.

Selecting Special Paper Type

Select the media type when copying on special types of paper such as thick paper (1) and vellum paper (2).
When the media type has been selected, the copier will change the fixing temperature to match the paper.
1 Press the Media Type key and select the media type.
The indicator for the media type selected will light up.
2 Proceed with the copying operation.
When media type has been selected, the copying speed is reduced.
or to enter the Length Size. 3.88 to 11.63(")/98 to
or enter the Width Size. 5.88 to 17.00(")/148
to
Preparations
Non-std size L
297mm
Non-std size W
148mm
2-9