Advanced - Security - Secure Protocols; Advanced - Security - Ieee802.1X - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

COMMAND CENTER Pages
Advanced > Security > Secure Protocols
Advanced > Security > IEEE802.1x
46
Item
Run once now
You can encrypt communication between a PC and this machine using SSL
encryption.After you have changed this setting, you must restart this machine. For the
restarting procedure, refer to Basic > Defaults > Reset on page 9.
Item
SSL
Effective
Encryption
HTTP Security
Secure
Only
(HTTPS)
Not
Secure
(HTTPS &
HTTP)
IPP Security
Secure
Only (IPP
over SSL)
Not
Secure
(IPP over
SSL&IPP)
NOTE: When the SSL is set to On and HTTP Security is set to Secure (HTTPS), the
document boxes cannot be accessed the TWAIN driver.
The IEEE802.1x security protocol allows the user to login to the secured networks based
on the client certificates.
Item
IEEE802.1x
Description
You can test this by clicking the Send button to immediately
send a report.
Description
Specifies whether or not to use the SSL protocol.
Selects the encryption algorithm(s) to be used.
Specifies the security level.
Encrypts all communication. Access is possible only with a
URL that begins with "https://." Access attempts using an
ordinary http:// URL are automatically redirected to the URL
where "http://" is replaced with "https://."
Enables access for both encrypted and unencrypted
communication. Access is possible with https:// and http://
URLs. The former URL establishes encrypted communication
and the latter establishes normal communication.
Specifies the security level.
Encrypts all communications.
Enables access for both encrypted and unencrypted
communications.
Description
Specifies whether or not to use the IEEE802.1x protocol.
KYOCERA COMMAND CENTER