Basic - Security - Device Security - General; Basic - Security - Device Security - Interface Block - Kyocera COMMAND CENTER Multifunctional Printer Operation Manual

COMMAND CENTER Pages
1.
2.
3.
4.
Basic > Security > Device Security > General
Basic > Security > Device Security > Interface Block
12
Enter the Old Password.
Enter the password you want to set in New Password. This can be up to 32 (30 with
some models) character long.
Enter the same password in Confirm New Password.
Click the Submit button.
This page allows you to restrict access from the operation panel or USB host device. In
addition, an explanation about each security setting is displayed.
Item
Lock Operation
Panel
Filtering/
Firewall,
SNMPv1/v2,
SNMPv3, SSL,
IPSec,
IEEE802.1x
This page allows you to restrict access from each interface.
Item
Network
USB Device
USB Host
Parallel I/F
Optional I/F
Description
Restricts access from the operation panel.
When it is set to Lock, use of the System menu on this
machine, registration in and editing of the Address Book and
Box, use of the Stop key, and cancellation of jobs are forbidden.
When it is set to Partial Lock, use of the System menu on
this machine and registration in and editing of the Address
Book and Box are forbidden.
When it is set to Unlock, use of all keys is permitted.
An explanation about each security setting is displayed.
When you click a link in the sentence, the appropriate tab of
the Advanced page opens.
Description
Specifies whether or not to restrict access from each of the
interfaces on the left. Access from the interfaces that are set
to Lock is restricted.
Access from the network interface cannot be restricted.
Access can be restricted on a per-protocol basis. Refer to the
next section.
KYOCERA COMMAND CENTER