Citizen iDP-460 User Manual page 48

RS
[Name]
[Code]
[Function]
[See Also]
US
[Name]
[Code]
[Function]
[See Also]
SO
[Name]
[Code]
Set Double Width Character
<1E>H
This command prints its subsequent characters in double width. When there is only one
character worth of position in a line, it will be printed in normal width. This attribute
remains valid until the US command(normal width mode) or CAN command is received.
In the P-200 mode, this attribute is reset to normal width at the beginning of each line,
every time the line is fed.
US, SO, SI
Set Normal Width Mode
<1F>H
This command resets the double width character attribute and prints in normal width. The
print data received after this command is printed as normal width characters.
RS, SO, SI
Set Double Width Character or Specify High Page
<0E>H
iDP-460 User's Manual
ALL
ALL
ALL