Citizen iDP-460 User Manual page 47

FS
[Name]
[Code]
[Function]
[Caution]
[Initial Value]
[See Also]
GS
[Name]
[Code]
[Function]
[Caution]
[Initial Value]
[See Also]
Execute P-250 Mode
<1C>H
This command resets all the attributes, clears the print buffer, and set the right margin to
42. A subsequent command and printer operation will be of the P-250 mode.
If this command is received halfway printing, the data and attributes so far will be
deleted. If this command is set in the P-250 mode, it will be ignored.
The P-200 mode is effectuated immediately after power-on.
GS
Execute P-200 Mode
<1D>H
This command resets all the attributes, clears the print buffer, and set the right margin to
40. A subsequent command and printer operation will be of the P-200 mode.
If this command is received halfway printing, the data and attributes so far will be
deleted. If this command is set in the P-200 mode, it will be ignored.
The P-200 mode is effectuated immediately after power-on.
FS
iDP-460 User's Manual
P-200,40ch
P-250,42ch