7.3.6
Electrical Characteristics
(1) RS-232C circuit
Input (RD, DSR)
Output (DTR, TD)
DTR
8. DRAWER KICK-OUT CONNECTOR AND POWER CONNECTOR
8.1 Specifications of Drawer Kick-Out Connector (D-type Only)
(1) Drawer kick-out drive signal
The pulses specified by the BELL command(07h) are output.(Approx. 200 ms)
(2) Electrical characteristics
1) Drive voltage: 24 V DC
2) Drive current: 0.8 A at maximum
8.1.1
Connector's Pin Configuration
No.
Signal
1
FG
2
DRAWER
3
4
VDR
5
[Printer Side]
Equivalent MAX232
Equivalent to MAX232
Mark=(-8V): At Busy
Space=(+8V): At Ready
Frame Ground
Drawer drive signal
Drawer drive power
RD
Mark=(-8V): Stop bit
Space=(+8V): Start bit
TD
Mark=(-8V): 1
Space=(+8V): 0
Function
iDP-460 User's Manual
[Host Side]