Citizen iDP-460 User Manual page 46

CAN
[Name]
[Code]
[Function]
[Caution]
[See Also]
NULL
[Name]
[Code]
[Function]
DC2
[Name]
[Code]
[Function]
[Caution]
Clear Print Buffer and Cancel Character Attribute
<18>H
This command clears the contents of the print buffer without printing them and resets the
character attribute and other attributes to Inactive or Default.
If the printer has started printing from the print buffer, this command will be ignored.
ESC c
Pad character (NOP)
<00>H
If this character code is received, it will be ignored without being handled as the data. It
has no effect on other command or setting. If it is received as a command's accessory
code or data, it will have a function.
Specify Red Print
<12>H
This command specifies red print.
In the P-250 mode and P-900R mode, this command can be set for each character. In the
other modes, however, it is to be set for each line.
iDP-460 User's Manual
ALL
ALL
ALL