Xerox Phaser 3100MFP Service Manual page 22

Status Indicator RAPs
0A No document to recover
0B Wrong number of pages
0C Received document faulty.
0D Document transmission fault
13 Memory full
14 Memory full
16 List number x not retransmitted
19 Stopped by correspondent
1A Disconnect
2-4
Table 1:
You have attempted to recover a document
from a correspondent, but the latter has not
stored the document or the password that
was entered is wrong.
There is a difference between the number
of pages indicated when the document was
stored for transmission and the number of
pages actually transmitted.
The document is too long to be received in
its entirety.
Document reception error.
The machine memory is full (there are too
many documents that have been received
but not yet printed, or waiting to be trans-
mitted).
Received document memory saturated.
Failure to retransmit a document via a
remote fax (the requested list of recipients
is not programmed on the remote fax).
Communication stopped by your corre-
spondent (Example: a machine attempts to
recover a document from your machine,
and there is no document waiting for this
correspondent).
Transmission has not started (the phone
line is too noisy).
04/08
Contact your corre-
spondent to check
whether the document to
recover has been stored
or to check the validity of
the password.
Check the number of
pages of the document.
Ask the correspondent to
check/reduce the length
of his document.
Ask the correspondent to
retransmit his document.
Print the received docu-
ments. Delete or transmit
in immediate mode the
documents waiting to be
transmitted.
Print the received docu-
ments.
Check that the list of
recipients is programmed
on the remote fax.
Check the quality of the
phone line or restart the
transmission at a later
time.
Phaser 3100 MFP