Xerox Phaser 3100MFP Service Manual page 198

General Procedures and Information
• (T_DATE_CHG_NOIR): date of the last replacement of the print cartridge.
Transmission Data
• (TCAUSE_EMIS): reason for the remote readout transmission;
• (TDATE_EMIS): date of the transmission of the remote readout.
Reminders
• Every machine is equipped with a copy counter, implemented in EEPROM memory on the
CPU board. This counter is used in particular by the Remote Readout function. It can be con-
sulted by the user (see § 5 of the User booklet). This counter cannot be modified. It is stored
indefinitely.
• Before any service on the machine that risks modifying the installation parameters or the
value of the counter (replacement of the CPU board or installation of new software), a manual
Remote Readout transmission should be performed, if the state of the machine allows it. If
this transmission is not possible for any reason, print out the Remote Readout parameters or
display the copy counter and note these values on the service report.
6-50 04/08 Phaser 3100 MFP