Xerox Phaser 3100MFP Service Manual page 192

General Procedures and Information
Downloading with the miniboot
Via the executable TELUSB2
This procedure requires a standard PC running under Windows and equipped with the
TELUSB2.exe (version 2.02) executable and a USB cable.
Before you start, position the bit n° 8 to 1 on the Soft-switch 1.
1. Set the machine On/Off switch to Off (position 0).
2. Connect the machine to the PC via the USB cable.
3. Press the 4, 6 and 0 keys simultaneously and set the On/Off switch to On (position I). The
machine is switched on. The message USB DETECTED WAITING FOR DOWNLOAD is dis-
played and an alert sound is emitted. If the message WAITING FOR A USB LINK is dis-
played, check that the machine is properly connected to the PC via the USB cable.
4. Release the 4, 6 and 0 keys.
5. Launch the executable TELUSB2.EXE and select the file to be downloaded (extensions.bin
or.fwf).
After about ten seconds, a window will appear to indicate that the download was successful.
The machine should not be restarted immediately.
If the machine restarts immediately, the file is corrupted (checksum false) or the software is
not compatible with the machine. The machine then restarts with the initially installed soft-
ware. In this case, check the file and repeat step 1.
6. After about 40 seconds, the machine switches off then restarts. The message WAIT is dis-
played.
7. Check the version of the principal software and checksum by typing in
software version and the miniboot's checksum by typing in
Via the UdpateDevice function of the Companion Suite
This procedure requires a standard PC running under Windows and equipped with the Compan-
ion Suite software and a USB cable.
Before you start, position the bit n° 8 to 1 on the Soft-switch 1.
1. Set the machine On/Off switch to Off (position 0).
2. Connect the machine to the PC via the USB cable.
3. Press the 4, 6 and 2 keys simultaneously and set the On/Off switch to On (position I). The
machine is switched on. The message RECEIVING FILE is displayed and an alert sound is
emitted.
4. Release the 4, 6 and 2 keys.
5. On the PC, click START >ALL PROGRAMS >COMPANION SUITE >PHASER 3100 MFP >
UPDATE.
6. In the Update window, click on the BROWSE icon and select the update file to be down-
loaded on the machine.
7. After selecting the update file, click on OPEN.
8. Click on UPDATE.
6-44 04/08
* V or check the
* B.
Phaser 3100 MFP