KVH Industries TracVision C3 Owner's Manual page 39

This information has to be entered for each of the four
transponder categories:
• vertical high
• horizontal high
or
• right
TracVision C3 requires that the data fields for all four
transponder categories be provided. If the selected satellite does
not have information for one or more of the transponder
categories, default information should be entered in the fields as
follows:
Transponder Data
Frequency
Symbol Rate
FEC Code
Network ID
Polarity and Band
After entering this information, it is necessary to save these
settings. To do so, type:
@SAVE,A @SAVE,B
(or
@DEBUGOFF
After completing this process,
ZAP
power or typing .
One of your user-defined satellite options has now been added to
the TracVision C3 satellite library. This option will now be
available the next time the SATINSTALL command is given.
54-0159 Rev. G
• vertical low
• horizontal low
• left
Default Value
00000
27500
the same value as provided for those
transponders with data
0x0000
whichever combinations are not
already provided
if data is for User2 satellite)
restart the system by either cycling
Table 2-6
Default Transponder Values
Installation
2-21