KVH Industries TracVision C3 Owner's Manual page 24

A Guide to TracVision C3
Forward Shipping
Restraint Storage
Rotating Plate Shipping
Restraint Storage
TracVision C3 Shipping Restraints
(Storage Position)
2-6
11. Reposition the mounting plate over the drilled
mounting holes, lining up the the mounting plate
holes with the holes in the mounting surface.
Apply a bead of silicone sealant around each of
the six mounting holes on the top surface of the
mounting plate.
12. Place the antenna unit on top of the mounting
plate, making sure all holes are aligned.
13. (Optional) For convenient storage, the shipping
restraints may be rotated 180º and secured to the
mounting bolts (see Figures 2-6 through 2-8).
Figure 2-6
Figure 2-7
Figure 2-8
Shipping Restraint
Shipping Restraint
LNB
Installation Bolts and Washers
Rotating Plate Shipping Restraint (1 of 2)
Installation Bolt and Washer
Rotating Plate
Rotating Plate
Forward Shipping Restraint
Forward
Shipping Restraint