Integrated Receiver Decoder (Ird); Materials Provided With Tracvision C3 - KVH Industries TracVision C3 Owner's Manual

A Guide to TracVision C3
Before you can start watching
satellite TV using your TracVision
antenna, you will need to activate
your IRD. Refer to Section 2.4,
"Activating the IRD," for more
details.
TracVision C3 Packing List
Cables for the TracVision C3 are
stored beneath the antenna unit
during shipping.
1-4

1.2.2 Integrated Receiver Decoder (IRD)

The IRD (purchased separately) receives satellite signals from the
antenna unit for signal processing and channel selection, and
sends the signals to the TV set for viewing. The IRD also
provides the interface for the user to activate authorization for
reception. Please refer to the User's Manual provided with your
selected IRD for complete operating instructions.
1.3
Table 1-3 lists the units, cables, and materials packed in the
TracVision C3 package by name and KVH part number.
Table 1-3
Component
Antenna Unit (comprising):
Baseplate Assembly
Radome Assembly
RF Cable (45 ft/14 m)
Data/Power Cable (45 ft/14 m)
PC Cable (6 ft/1.8 m)
Mounting Plate
Kitpack***
Owner's Manual
IRD Ground Wire
Switchplate
TV/SAT Switch (optional)
† European TracVision C3 system
†† North American TracVision C3 system (defaulted to DIRECTV)
††† North American TracVision C3 system (defaulted to DISH Network)
†††† North American TracVision C3 system (defaulted to ExpressVu)
* Baseplate assembly with single-output LNB
** Baseplate assembly with dual-output LNB
*** A complete listing of kitpack contents is provided in
Materials Provided with
TracVision C3
KVH Part No.
01-0225-20
†
01-0225-23
††
01-0225-26
†††
01-0225-29
††††
02-1245-01*
02-1245-03**
02-953-04
32-0417-45
32-0730-45
32-0628-06
20-0684
72-0102
54-0159
32-0583-50
02-1023-01
01-0245
Table 2-2.