Toshiba MM-A0280HT Service Manual page 53

(6) Service P .C. board selection corresponded table MCC-1361-01
The indoor control P .C. board can correspond to multiple models. When replacing
MCC-1361-01 P .C. board assembly, set DIP switch, rotary switch, and jumper according to the
following description.
PCB Label
CM00C01
CM00C02
Switch setup
1 SW01 Indoor unit No.
2 SW02 Network address
3 SW03
4 SW06
5 SW07 Central Control Switching : Match to the setup contents of P .C. board before
6 SW08 HP setup
Jumper setup
Match to the setup contents of P .C. board before replacement.
In some models, the following selections are provided. O: Provided X: None
13
PCB label
Control Circuit Configuration
MM-U140, MM-U112, MM-U080, MM-U056
MM-B140, MM-B112, MM-B080, MM-B056, MM-SB028
J11
MCC-1361-01
Indoor Units
Model
: Match to No. which the rotary switch is setup.
: Master unit ...... 1
: Server units ..... 2 to 16
: Match to setup contents of P .C. board before
replacement.
: Match to setup contents of P .C. board before
replacement.
: Match to the setup contents of P .C. board before
replacement.
(In some models, it is not available.)
replacement.
: Match to the setup contents of P .C. board before
replacement.
O Filter timer 120H
X Filter timer 2500H
54