1
Dismounting of the ignition (Kokusan)
– Hold the flywheel with the holding spanner
– Put the protection cover on the crankshaft thread, twist in the flywheel
extractor and remove the flywheel.
– Undo the 3 screws
plate.
2
Dismounting of the ignition (SEM)
– Hold the flywheel with the special tool and undo the collar nut.
– Place protective cap on crankshaft thread.
– Twist in the flywheel extractor and remove the flywheel.
– Loosen the 3 collar screws
the casing.
3
1
and undo the collar nut.
2
and remove the stator together with the base
3
, and take base plate with stator out of
4-6C