Service Assignment; Service Uri - Toshiba IPedge Installation Manual

OLG FLEXIBLE ACCESS CODE PROGRAMMING

Service Assignment

Service URI

11-6
1. SIP trunk Channel Group = Channel Group tab number (Use the
Channel group created above.)
2. Service number = Row number (Enter the digit 1 for the first
assignment. Increment for each new assignment.)
3. Service Definition Index = Value create in service definitions tab.
The SIP URI is the Telephone Number (TN) from the SIP trunk provider.
1. Click on the New icon.
2. Service Definition Index: The service index that defines the SIP
provider. This is the number assigned in the
page 11-5.
3. SIP URI Number: This is the TN of the URI, typically this is the same
as the CLID.
4. SIP URI User Name: Refer to your SIP Trunk provider.
5. SIP URI password: Refer to your SIP Trunk provider.
6. SIP URI Channel Group enter the SIP Trunk Channel Group number
created in "Creating the Channel Group"
7. SIP URI Attribution: Typically the value is MAIN. If your SIP Trunk
provider registers only the Primary number set the remaining
numbers to SUB. When SUB is used the URI number cannot be used
as the Calling Number.
Important! If a SIP URI (TN) is entered into more than one Service
Definition Index certain system features may not function
as expected. When processing a SIP call the system
searches for the URI until the first match is found. If a
URI is recorded in two Service Definition Indexes,
assigned to two ILGs the SMDR records will only show
the calls in one ILG.
The configuration is complete.
Service Assignment
"Service Definition"
on page 11-5.
Installation Manual June, 2011
on