BEZEL INSTALLATION
EM Server Bezel
2-12
1. After the chassis has been secured to the rack place a key into the
slots on each end of the bezel.
2. Rotate the keys 90 degrees.
3. Place the bezel on the front of the chassis.
4. Rotate the keys 90 degrees then, remove.
5. Store the keys in an appropriate location.
The (P/N: I-EM-BZL-1A) bezel can be attached directly to the EM Server
chassis.
1. Remove the handles from the front of the server.
2. Attach the server handles received i the bezel kit.
3. After the chassis has been secured to the rack place a key into the
slots on each end of the bezel.
4. Rotate the keys 90 degrees.
5. Place the bezel on the front of the chassis.
6. Rotate the keys 90 degrees then, remove.
7. Store the keys in an appropriate location.
EM Server Bezel
Installation Manual
June, 2011