Programming The Camera - Polaroid Miniportrait 204 Repair Manual

Repair Manual
(4)

Programming the camera

This section describes the process for accessing the Program Mode and making
the required adjustments prior to picture-taking.
Important: The Display Screen must read READY or LOAD FILM in order to access the Program
Mode (refer to item 4. in the previous section, "Making ID photos").
1. Press the Program/Power Button (B)...
... and the program menu (at right) will be
displayed. This initial screen highlights
COUNTS, which shows the number of film
frames that have been pulled, and the
number of strobe firings. No adjustments are
made in this screen.
Note: You can scroll and select any item on the menu
by pressing and holding the Program/Power Button;
the selection will be made upon releasing the button.
2. Press the Program/Power Button (B) a
second time and the EXPOSURE adjustment
screen is displayed. A range of seven
exposure settings can be selected.
To decrease exposure, repeatedly press the
Brightener Button (Q) until the desired
exposure is set. When in the Program
Mode, this button acts as a DOWN cursor
(indicated by arrow).
Model 204/404 MiniPortrait Camera
COUNTS
EXPOSURE
PICTURE SELECT
DEVELOPMENT TIME
RESET COUNTS
LANGUAGE
AUTO SHUT OFF
EXIT
EXPOSURE
19
B
FILM
000380
STROBE
001139
Q