No-Entry Arming - DSC HS2016 User Manual

4 S e c u r i n g t h e P r e m i s e s
• Arming all other internal sensors.
Arming the system in Night mode is only possible after the system has first been armed in Stay mode. To
access armed interior areas when the system is armed in Night Mode, you must disarm the system.
NOTES:
Ensure that your installer has provided you with a list identifying all programmed night zones.
Your installer can configure a function key to arm the panel in Night mode without the system
already being armed in Stay mode.
To Arm the System in Night mode
1. If configured, press and hold the Night Arm key for 2 seconds.
OR
1. Once the system is armed in Stay mode (Armed
*
keypad press
OR
*
press
1
2. If required, enter your [access code]. All interior zones will now be armed,
except for devices programmed as Night Zones.
• The Night mode icon
To gain access to interior areas that are armed during Night mode
• Disarm the system by entering your [access code].

4.1.4 No-Entry Arming

No-Entry Arming arms the system in Stay mode by:
• Removing the Entry Delay from all configured zones.
• Arming all perimeter sensors.
• Bypassing all interior sensors.
An entry through any zone will create an instant alarm.
To No-Entry Arm the System
1. Check that the Ready
*
2. Press
9
3. If zones have been bypassed, ICN or LED keypads bypass LED
and the bypassed zones #s will be shown. On an LCD keypad a warning
appears.
4. After successfully initiating the arming sequence the:
• Armed light
entry delay.
• Keypad sounds fast beeps.
• Keypad displays "Exit Delay in Progress".
5. To cancel the arming sequence, enter your [access code].
6. Once the exit delay timer expires, the system is armed.
*
.
turns on.
indicator is on and your system is ready to be armed.
and, if required, enter your [access code].
flashes as a reminder that the system is armed and has no
indicator is on) at any
will light
13
LCD Display
Date Time
JAN 02/13 2:06a
then
Press (*) for <>
Interior Arm
Enter Your
Access Code
then
Interior Has
Been Armed
LCD Display
Date Time
JAN 02/13 2:06a
Enter Your
Access Code
* Warning *
Bypass Active
then
Armed With No
Entry Delay
then
Exit Delay in
Progress
System Disarmed
No Alarm Memory
System Armed
in Stay Mode