Adding, Changing And Deleting Access Codes - DSC HS2016 User Manual

7 M a n a g i n g U s e r s
Duress Use if forced to access your keypad under threat. Duress codes function the same as
user access codes, except they transmit a Duress Report to your monitoring station
Codes
when used to perform any function on the system.
Duress codes cannot be used to access Access Codes[*5], User Functions[*6] or
Installer[*8] menus. For information on how to program a Duress Code see 7.2 "Con-
figuring additional User Options".
One Time Use when needing to grant someone one time access to your home once per day, i.e., a
cleaning person or contractor. The ability to disarm the system is reset at midnight or
User Code
when the one time user code is keyed in by the master code user. For information on
how to program a One Time User Code see 7.2 "Configuring additional User Options".
To open the Access Codes Menu
*
1. Press
5
OR
*
press and use the scroll keys
*
press .
2. Enter [Master or supervisor code].
3. Enter [2 digit user #]
OR
scroll through the list of users and press
the user number will begin flashing.
4. To go back to the Ready state press

7.1.1 Adding, Changing and Deleting Access Codes

Each configured user is assigned a number from 01-95. Access codes cannot be duplicated.
To Add or Change User Access Codes
1. From the desired user press
2. Enter a new 4 or 6 digit access code. After entering a new code you will be
automatically returned to the previous menu, and on an LCD display the flag
is changed to P from -. On an ICN or LED keypad the programmed user will
have their digits displayed. If a duplicate code is entered the error tone will
sound.
To Delete a User Access Code
1. From the desired user press
*
2. Press . The code is deletes, and you are returned to the previous screen.
The flag is changed to - from P. On an ICN or LED keypad the programmed
user's digits will cease being displayed.
NOTE:
Any proximity tags associated with deleted user codes will need to be re-enrolled.
to navigate to Access Codes and
*
.
#
*
or
1
*
or
1
27
. On an LED keypad
LCD Display
Press (*) for <>
User Functions
Enter Master
Access Code
Press (*) for <>
{User Label}
LCD Display
Press (*) for <>
Access Code
Enter New Code
XXXXXX
then
Press (*) for <>
User Code 03 P
LCD Display
Press (*) for <>
Access Code
Enter New Code
030516
then
(*) to Edit <>
User Code 03 -