No-Entry Arming - DSC HS2016 User Manual

4 S e c u r i n g t h e P r e m i s e s
To Arm the System in Night mode
1. Once the system is armed in Stay mode (Armed
*
pad press
OR
*
1
press
2. If required enter your [access code]. All interior zones will now be armed
except for devices programmed as Night Zones.
The Night mode icon
To gain access to interior areas that are armed during Night mode
• Disarm the system by entering your [access code].

4.1.4 No-Entry Arming

No-Entry Arming arms the system in Stay mode by:
• Removing the Entry Delay from all configured zones.
• Arming all perimeter sensors.
• Bypassing all interior sensors.
An entry through any zone will create an instant alarm.
To No-Entry Arm the System
1. Check that the Ready
*
9
2. Press
3. If zones have been bypassed a warning appears.
4. After successfully initiating the arming sequence the:
• Armed light
entry delay.
• Keypad sounds fast beeps.
• Keypad displays "Exit Delay in Progress".
5. To cancel the arming sequence, enter your [access code].
6. Once the exit delay timer expires the system is armed.
*
.
turns on.
indicator is on and your system is ready to be armed.
and enter your [access code].
flashes as a reminder that the system is armed and has no
indicator is on) at any key-
11
What you see
Date Time
JAN 02/13 2:06a
then
Press (*) for <>
Interior Arm
Enter Your
Access Code
then
Interior Has
Been Armed
What you see
Date Time
JAN 02/13 2:06a
Enter Your
Access Code
* Warning *
Bypass Active
then
Armed With No
Entry Delay
then
Exit Delay in
Progress
System Disarmed
No Alarm Memory
System Armed
in Stay Mode