Bypass Groups; Arming Errors And Exit Faults - DSC HS2016 User Manual

4 S e c u r i n g t h e P r e m i s e s

4.4.1 Bypass Groups

Program frequently bypassed zones into the system as a bypass group. Using bypass groups avoids
individually bypassing each zone. One bypass group can be programmed per partition.
NOTE:
This feature is not to be used in UL listed installations.
To Program a Bypass Group
*
1. Press to enter the function menu.
*
2. Press or
3. Enter the [3 digit zone #] of all zones you want bypassed
OR
Scroll to and press
4. Press
9 9
bypassed zones
OR
Scroll to Bypass Options using the
Prg Bypass Group and press
5. The Bypass Group is now programmed. The keypad will beep three times.
6. To exit bypassing mode and return to the Ready state, press
To Load a Bypass Group
*
1. Press to enter the function menu.
*
2. Press or
3. Press
9 9
OR
Scroll to Bypass Options using the
Bypass Group and press
4. The group of zones are now bypassed. The following message briefly
displays.
5. To exit bypassing mode and return to the Ready state, press
6. If using an LED or ICN series keypad, the
zones #s will be shown. If the system is ready to arm the Ready
will be lit. When arming the system the following message briefly displays.

4.5 Arming Errors and Exit Faults

The PowerSeries Neo audibly notifies you of any errors when you are attempting to arm the system or exit
the premises.
. If required enter your [access code].
1
*
to indicate all zones you want bypassed.
to program the bypass group with the currently
5
*
.
. If required enter your [access code].
1
1
*
.
keys and press
#
#
keys and press . Scroll to
#
#
will light and the bypassed
17
LCD Display
Press (*) for <>
Zone Bypass
Scroll to
Bypass Zones
Upstrs H Wdw
Press (*) for <>
Prg Bypass Group
. Scroll to
Bypass Group
Programmed
.
System is
Ready to Arm
LCD Display
Press (*) for <>
Zone Bypass
Scroll to
Bypass Zones
Press (*) for <>
Bypass Group
Bypass Group
Zones Bypassed
.
System is
Ready to Arm
* Warning *
Bypass Active
indicator
<>
<>
B
<>