Using The Keypad To Lookup The Number To Call For Sms Commands; Sending Sms Commands To Your System - DSC HS2016 User Manual

6 W i r e l e s s K e y s a n d o t h e r D e v i c e s

6.3.1 Using the Keypad to Lookup the Number to Call for SMS Commands

The phone number of the system is programmed by the installer. To quickly find the phone number
perform the following steps
To find the System's Phone Number
1. Check that the Ready
*
2. Press
6
OR
*
press and use the scroll keys
*
press and enter [Master Code].
3. Press
1 1
gramming and press
4. Scroll to navigate to SMS Programming and press
number to send your SMS commands to displays.

6.3.2 Sending SMS Commands to your System

In order to successfully send commands to your system from your cellphone, you must send SMS messages
in the proper format. If configured, commands require the inclusion of a User Access Code in your
message. The access code will be verified by the system before executing any commands.
Additional information about sending SMS commands:
• Text messages are not case sensitive and extra spaces are ignored.
• In multi-partition systems and if the User has rights to manage the desired partitions, commands can
be sent to specific partitions by including the partition number. For more information on partitions see
section 10 "Managing Partitions".
• If the panel is configured to require an Access Code and the code is not sent or is invalid, the panel
will send a notification to the user advising the command was unsuccessful.
Table 6-1 lists all available SMS commands with examples of how to enter the Partition number and access
codes. The format for entering commands is as follows:
Command Partition number
Stay Arm 001
NOTES:
Verify with your installer that the Partition number and access code are required in your SMS
message. If one or both are not required, do not enter them in your SMS message.
Responses to Status and Alarm Memory requests may require more than 1 SMS message,
depending on status of the system. There is a 10 second delay between transmission of SMS
messages.
Table 6-1 SMS Commands
Commands
Stay Arm
Away Arm
Night Arm
Disarm
Activate Command Output 1
.
indicator is on and the system is disarmed.
or use the scroll keys
*
Access Code
1234
Notes
Stay arms the system
Away arms the system
Night arms the system
Disarms the system
Activates Output 1
to navigate to User Functions
to navigate to SMS Pro-
*
. The phone
24
LCD Display
Date Time
JAN 02/13 2:06a
Press (*) for <>
User Functions
Press (*) for <>
SMS Programming
Press (*) for <>
GSM Phone No.