How To Cut Off Media - Roland SOLJET PROIII XC-540 User Manual

How to Cut Off Media

Procedure

Media clamp

Front cover

Make sure

Cut-off Operations
Before you perform cutoff, be sure to detach the media clamps.
Performing cutoff with the media clamps remaining attached may cause the operation to be
interrupted due to detection of the media clamps.
When you're performing cutoff, never use
Unless the end of the media has been pulled out to a location to the front of the platen, cutoff
may not be performed smoothly.
lights up.
The media is cut off at
a location referenced
to the present tool
position.
2-2 Loading and Cutting Off Media
Open the front cover.
Detach the media clamps.
Close the front cover.
Hold down
one second or longer.
to pull the media back.
Chapter 2 Basic Operation
for
37