Verifying The Setting For The Amount Remaining Every Time The Media Is Changed - Roland SOLJET PROIII XC-540 User Manual

as by removing the media or raising the loading lever, the amount remaining at that time flashes on
the screen.
The amount of media remaining is not updated automatically when you change the media. Redo the
setting whenever you change the media.
Note, however, that when sheet media is loaded (that is, when [SETUP SHEET] is set to "PIECE"), the
setting for the amount of remaining media is made automatically.
You can also make the setting display this menu automatically whenever you change the media. See
the next section, "Verifying the Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.

Verifying the Setting for the Amount Remaining Every Time the Media Is Changed

Procedure

MENU
SHEET REMAIN

SHHET REMAIN
AUTO DISPLAY

AUTO DISPLAY
DISABLE
ENABLE

W 1346mm
SETUP SHEET
ROLL
Description
Setting this to "ENABLE" automatically displays [SHEET REMAIN] whenever you change the media and
finish setup.
This makes it impossible to go on to the next operation unless you redo the setting for the amount
remaining. This can be useful for keeping you from forgetting to redo the setting when you change
the media.
When you set this to "ENABLE," however, be sure also to set the [EDGE DETECTION] menu item to "EN-
ABLE. " When [EDGE DETECTION] is set to "DISABLE, " then [SHEET REMAIN] is not displayed automatically,
regardless of the setting for [AUTO DISPLAY].
Also, when sheet media is loaded (that is, when [SETUP SHEET] is set to "PIECE"), the setting for the
amount of remaining media is made automatically, and so this menu is not displayed.
 P. 94, "Using Transparent Media"
Default Setting
[AUTO DISPLAY]: DISABLE
6-5 Setting How the Printer Operates
Press .
Press twice.
Press .
Press twice.
Press .
Use to select "ENABLE."
Press to enable the setting.
Press .
Press to go back to the original screen.
Chapter 6 Feature Reference
105