41: Tempo Delay - Korg TouchView Trinity Effect Manual

41: Tempo Delay

41: Tempo Delay
This delay allows you to match the delay time with a song's tempo. For example, you can apply the delay
effect synchronized to the sequencer, or you can input the tempo prior to a real-time performance so that
the delay effect will match the song tempo. You can set the delay time in terms of a musical duration,
rather than as a value of time.
You can also specify any number of times for feedback.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Input Level D-mod
+
Input Level D-mod
Right
Tempo
120 [beat/min]
Mode
a
Src (fixed)
Tempo [beat/min]
b
Length
Time Adjust [%]
c
Delay 1362ms
Feedback Count
d
Src (fixed)
e Count [times]
Feedback
f Src
Amt
g High Damp [%]
h Low Damp [%]
Input Level D-mod: Src
i
Amt
Wet/Dry
j Src
Amt
106
Delay
Feedback Count: On/Off
Feedback
D-mod
Mode
Length: 3/16
Manual
Manual, D-mod
Tempo
30...250 beat/min
1...96 / 1...96
–10.00...+10.00%
OVER!!
Off, On
Gate1
0...96
–100...+100
None...Tempo
–100...+100
0...100%
0...100%
None...Tempo
–100...+100
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
High Damp Low Damp
Time Adjust [%]
Switches between the specified tempo and clock sync.
P.107
Source when Mode = D-mod (fixed to Tempo)
Tempo when Mode = Manual
Sets the delay time. Delay time = Length x Whole Note.
P.107
Fine adjustment of delay time
Delay time upper limit/error indication
Selects whether the number of feedback times is counted
or not. P.107
Source that triggers the counting of the feedback time
(fixed to Gate1).
Number of feedback times
Sets the feedback amount.
Modulation source of feedback amount
Modulation amount of feedback amount
Damping amount in the high range
Damping amount in the low range
Modulation source of the input level
Modulation amount of the input level
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Wet / Dry
P.107
P.107
P.107
P.44
P.44
P.44