12: Rotary Speaker Od (Rotary Speaker Overdrive) - Korg TouchView Trinity Effect Manual

12: Rotary Speaker OD
This is a stereo rotary speaker effect. It has an internal speaker simulator that simulates overdrive (recre-
ating the amp distortion) and characteristics of the rotary speaker, producing a very realistic rotary
speaker sound.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Right
D -mod
On/Off
D -mod
Mode Switch: Rotate/Stop
D
-mod
Speed Switch: Slow/Fast
D -mod
Overdrive
Src
a
Sw
Overdrive Gain
b
Overdrive Level
Overdrive Tone
c
Speaker Simulator
Mode Switch
Src
d
Sw
Speed Switch
e Src
Sw
Rotor/Horn Balance
f
ManualSpeedControl
Rotor Acceleration
g
Rotor Ratio
(Rotary Speaker Overdrive)
Horn
Rotary Speaker
Overdrive
Rotor
Manual Speed Control
Off, On
None...Tempo
Momentary, Toggle
0...50
0...50
0...15
Off, On
Rotate, Stop
None...Tempo
Momentary, Toggle
Slow, Fast
None...Tempo
Momentary, Toggle
Rotor, 1...99, Horn
None...Tempo
0...100
Stop, 0.50...2.00

12: Rotary Speaker OD (Rotary Speaker Overdrive)

Mic Distance
Rotor/Horn
Balance Mic Spread
Speaker Simulation
Switches overdrive on/off.
Modulation source that switches overdrive on/off.
Selects the switching mode of the modulation source that
switches overdrive on/off.
Determines the degree of distortion.
Overdrive output level
Tonal quality of overdrive
Switches speaker simulation on/off.
Switches between speaker rotation and stop.
Modulation source that toggles between rotation and stop
Selects the switching mode of the modulation source that
toggles between rotation and stop.
Switches the speaker rotation speed between slow and
fast.
Modulation source that toggles between slow and fast.
Selects the switching mode of the modulation source that
toggles between slow and fast.
Sets the volume level balance between the low-range
rotor and high-range horn.
Sets the modulation source in case the rotation speed is
changed directly. P.101
How quickly the rotor rotation speed in the low range is
switched. P.43
Adjusts the (low-range side) rotor rotation speed. Stan-
dard value is 1.0. Selecting "Stop" will stop the rotation.
Wet / Dry
Wet / Dry
P.134
P.101
P.43
133