11: 2Band Pitch Shifter - Korg TouchView Trinity Effect Manual

11: 2Band Pitch Shifter

11: 2Band Pitch Shifter
This pitch shifter sets an individual shift amount for the high and low input signal ranges. If you apply a
detune effect to the high range of a string sound, and add the lower octave to the low range, a large
ensemble sound is produced.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
+
Right
a Mode
Low Pitch [1/2tone]
b
Src
Amt
Low Fine [cent]
c
Amt
d Low High Damp [%]
High Pitch [1/2tone]
e
Amt
High Fine [cent]
f
Amt
g High High Damp [%]
High/Low Split Point
h
High/Low Balance
i Spread
Wet/Dry
j Src
Amt
i: Spread
132
Pitch Shifter
High/Low Split Point
Pitch Shifter
Slow, Medium, Fast
–24...+24
None...Tempo
–24...+24
–100...+100cent
–100...+100cent
0...100%
–24...+24
–24...+24
–100...+100cent
–100...+100cent
0...100%
1...100
Low, 1:99...99:1, High
–100...+100
Dry, 1:99...99:1, Wet
None...Tempo
–100...+100
This parameter specifies the width of the stereo image of the effect sound. With
a value of +100, the low range signal is output from the left channel and the high
range signal from the right channel. With a value of 0, both channels will output
a mix signal of low and high-range signals. With a negative value, the output
channel of the low and high-range signals will be reversed.
High Damp
High/Low
Spread
Balance
High Damp
Switches pitch shifter mode.
Sets pitch shift amount for the low range in steps of a
semitone. P.97
Modulation source of pitch shift amount
Modulation amount of pitch shift amount for the low range
Sets pitch shift amount for the low range in steps of one
cent. P.97
Modulation amount of pitch shift amount for the low range
High component damping amount in the low range
Sets pitch shift amount for the high range in steps of a
semitone. P.97
Modulation amount of pitch shift amount for the high
range
Sets pitch shift amount for the low range in steps of one
cent. P.97
Modulation amount of pitch shift amount for the high
range
High component damping amount in the high range
Splits frequencies between low and high ranges
Output balance between low and high ranges
Sets the width of the stereo image of the effect sound.
P.132
Sets the balance between the effect and dry sounds.
Modulation source of effect balance
Modulation amount of effect balance
Wet / Dry
Wet / Dry
P.96