05: St. Harmonic Chorus (Stereo Harmonic Chorus) - Korg TouchView Trinity Effect Manual

05: St. Harmonic Chorus (Stereo Harmonic Chorus)

05: St. Harmonic Chorus
This is a stereo harmonic chorus effect that applies chorus separately to the high and low ranges of the
input signal. You can set the parameters for the low and high range chorus individually. You can also use
the high-range chorus as a step chorus employing a step-shape LFO waveform. Thick, fine chorus effects
can be created when it is applied to strings or ensemble sounds.
Stereo In - Stereo Out
Left
Right
LFO: Tri / Sine
LFO: Tri / Sine
a LFO Waveform
LFO Phase [degree]: Low
b
High
LFO Frequency [Hz]: Low
c
High
LFO Step Freq [Hz]
(LFO Step Frequency)
d
High
Pre Delay [msec]: Low
e
High
Depth: Low
f
High
LFO Freq D-mod
(LFO Frequency D-mod)
g Src
Amt
Depth D-mod
h
Src
Amt
High/Low Split Point
i
High/Low Balance
124
(Stereo Harmonic Chorus)
Low Band Chorus
High Band Chorus
High/Low Split Point
High Band Chorus
Low Band Chorus
Step: On/Off
Triangle, Sine
–180...+180
–180...+180
0.02...20.00Hz
0.02...20.00Hz
Off, On
0.05...50.00Hz
0.0...50.0msec
0.0...50.0msec
0...100
0...100
Low, High, Both
None...Tempo
–20.00 (–80.00) ...+20.00Hz
(+80.00)
Low, High, Both
None...Tempo
–100...+100
1...100
Low, 1...99, High
LFO Phase
Selects LFO waveform.
The difference between low-range left and right LFO
phase. P.65
The difference between high-range left and right LFO
phase.
Low-range LFO speed
High-range LFO speed
Determines whether or not the high-range LFO is step-
shaped. P.125
Speed at which the LFO waveform becomes step-shaped
Low range delay time
High range delay time
Depth of low range LFO modulation
Depth of high range LFO modulation
Selects only low-range, high-range, or both ranges for
LFO speed modulation.
Modulation source of LFO speed
Modulation amount of LFO speed
Selects only low-range, high-range, or both ranges for
LFO modulation depth.
Modulation source of LFO modulation depth
Modulation amount of LFO modulation depth
Splits frequencies into low and high ranges
Sets output balance between low and high ranges.
Wet / Dry
High/Low Balance
High/Low Balance
Wet / Dry
P.125
P.125
P.125