01: Delay/Reverb - Korg TouchView Trinity Effect Manual

01: Delay/Reverb

This effect is a combination of a multitap delay and a hall-type reverb.
Mono In - Stereo Out
LEQ
Send2
EQ Trim
High Damp Low Damp
L Delay Time [msec]
a
Level
C Delay Time [msec]
b
Level
R Delay Time [msec]
c
Level
d Feedback
High Damp [%]
e
Low Damp [%]
Reverb Time [sec]
f
High Damp [%]
Pre Delay [msec]
g
Pre Delay Thru
EQ Trim
h LEQ [dB]
HEQ [dB]
Spread
i
Spread Control
Output Level
j Src
Amt
Pre Delay Thru
HEQ
Pre Delay
L Delay
C Delay
Feedback
R Delay
0...680msec
0...30
0...680msec
0...30
0...680msec
0...30
–100...+100
0...100%
0...100%
0.1...10.0
0...100%
0...200msec
0...30
0...30
–15...+15
–15...+15
0...30
Delay, Reverb, Both
0...100
None...Tempo
–100...+100
Reverb
Spread
Level
Spread
Level
Level
Sets the TapL delay time.
TapL output level
Sets the TapC delay time.
TapC output level
Sets the TapR delay time.
TapR output level
Sets the TapC feedback amount.
Damping amount in the high range
Damping amount in the low range
Sets the period of reverberation time.
Reverberation damping amount in the high range
Reverb delay time P.116
Mix ratio of non-delayed reverb sound
Reverb input level to EQ
Reverb gain for the low-EQ
Reverb gain for the high-EQ
Sets the width of the stereo image of the effect sound.
P.150
Determines whether delay output, reverb output, or both
outputs are controlled for the width of the stereo image.
Output level of the effect sound
Modulation source of output level
Modulation amount of output level
01: Delay/Reverb
Return2
Left
Output Level
Output Level
Return2
Right
P.44
149