Page 1
Listening to the demo songs; Selecting/playing Programs and Combinations Selecting Programs and Combinations by Category Using the AUDITION function as you select Programs Work with these great TRITON Le Programs and Combinations Sequence mode: Creating songs quickly with Song Templates Automating the mix; Using Compare as UNDO One Touch Record;...
Press F8 (“OK”), and once again to confirm. In-Store Note: When you power off the TRITON Le, loaded demo songs will be erased from memory. For sales presentations, make sure to reload the demos each morning using the above procedure! Listen to the Demo Songs After the preload demo songs have been loaded, press the SEQ key.
Page 3
Press the TIMBRE/TRACK key 3 or 4 times at the desired tempo: the program’s LFO and the BPM of Insert Effect 2 (algorithm 50: St. BPM Delay) both update to the tapped tempo. Work with these great TRITON Le Programs and Combinations: PROGRAM...
Page 4
TRITON Le EasyStart Sequence Mode: Creating songs quickly with Song Templates Press the SEQ key Type in a “Song #” not yet in use (if you’ve loaded the Preload Songs, type #2) on the numeric keypad, then press ENTER Confirm “Create New Song?” by pressing F8 (“OK”).
RAM. The Triton LE samples at 48 kHz, 16-bit, in mono or stereo. With the provided 16 MB, the Triton LE is capable of recording samples of 174 seconds @ mono, or 87 seconds @ stereo. Fully expanded with SIMM modules to 64 MB, it allows about 11 ½...
Page 6
In addition, the internal sequencer can ignore realtime commands that would reset the sequencer to an initialized state. Individual Output for Metronome Click when Sampling: Now there can be a tempo reference, not only a count- off, for sampling. File Compatibility: Sound and song files may be shared between ALL the Korg workstation instruments.
Page 7
Note that there are patterns pre-assigned to every Program and Combination in the TRITON Le. Simply press to turn the ARP key ON (lit), and then play the keyboard to trigger the assigned patterns.