18: Phaser - Korg TouchView Trinity Effect Manual

18: Phaser

This effect creates a swell by shifting the phase. It is very effective on electric piano sounds.
Mono In - Mono Out
In
LFO: Tri / Sine
a LFO Waveform
b LFO Shape
LFO Frequency [Hz]
c Src
Amt
d Manual
e Depth
f Resonance
g High Damp [%]
Wet/Dry
h
Src
Amt
f: Resonance
h: Wet/Dry
g: High Damp [%]
Phaser
Resonance
LFO Shape
Triangle, Sine
–100...+100
0.02...20.00Hz
None...Tempo
–20.00...+20.00Hz
0...100
0...100
–100...+100
0...100%
–Wet...–1:99, Dry,
1:99...Wet
None...Tempo
–100...+100
The peak shape of the positive and negative Feedback value is different. The
harmonics will be emphasized when the effect sound is mixed with the dry
sound, if you set a positive value for both Resonance and Wet/Dry, and if you
set a negative value for both Resonance and Wet/Dry.
This parameter sets the amount of damping of the resonance in the high range.
Increasing the value will cut high-range harmonics.
High Damp
Selects the LFO Waveform.
Determines how much the LFO waveform shape is
changed. P.32
LFO speed
Modulation source of LFO speed
Modulation amount of LFO speed
Sets the frequency to which the effect is applied.
Depth of LFO modulation
Sets the resonance amount.
Resonance damping amount in the high range
Sets the balance between the effect and dry sounds.
P.25, 35
Modulation source of effect balance
Modulation amount of effect balance
18: Phaser
Wet / Dry
P.35
P.35
35