Table of Contents
Advertisement
6
Network Printing in a Windows Environment (Available only with FAX3900)
6.4
Setting Up the Network Connections
6.4.1
Peer-to-Peer Printing
Windows 98/ Windows Me
Important
Before continuing to set up the network settings, check the following:
Check that the computer is set up to use the TCP/IP protocol.
Check that the copier is also set up to use the TCP/IP protocol.
Check that the printer driver has been installed on the computer.
(For details on installing the printer driver, refer to "Installing the Printer
Driver" on page 3-1.)
1
Click [Start], point to [Settings], and then click [Printers] to open the
"Printers" folder.
2
Right-click the icon for the installed printer driver.
3
Click [Properties] to open the Properties dialog box.
4
Click the "Details" tab, and then click [Add Port].
5
Select Other.
6
Select
7
Click [OK].
8
Enter the copier IP address.
9
Click [OK].
6-12
Peer2Peer
from the list of port types.
Advertisement
Table of Contents
